师资

EN       返回上一级       师资搜索
赵新彦
研究教授
0755-88018157
zhaoxy@sustech.edu.cn

教育经历

博士学位:南京邮电大学(导师:黄维院士),2014.07

硕士学位:北京理工大学, 2003.03

学士学位:西安工业大学,1999.07


工作经历

2024/11-至今:南方科技大学,力学与航空航天工程系,研究副教授、研究教授

2018/04-2024/10:南方科技大学,前沿与交叉科学研究院,研究助理教授、研究副教授

2017/07-2018/02: 新加坡国立大学电子与计算机工程学院,访问学者

2014/12-2018/04: 南京工业大学 先进材料研究院,博士后、副教授

2012/06-2013/01: 新加坡材料工程研究院(IMRE),访问学者

2003/04–2014/11: 南京邮电大学 光电工程学院,助教、讲师、副教授


交叉研究领域

  • 极紫外光源

  • 光与流体相互作用

  • 半导体器件制备过程的流体力学问题

  • 溶液法打印微纳薄膜过程的流体力学问题


科研基金

主持:

  • 国家自然科学基金面上项目:极紫外光源中锡碎屑对反射镜的冲击规律和污染损伤机理研究,49万元,2025.01-2028.12

  • 国家自然科学基金面上项目:基于剪纸拉伸结构实现光线追踪的有机光伏电池,59万元,2020.01-2023.12

  • 国家自然科学基金青年基金项目:基于静电喷雾的聚合物太阳能电池活性层微观结构调控与光电性能研究,19万元,2017.01-2019.12

  • 广东省基础与应用基础研究基金面上项目:柔性微齿叶片刷涂高效率有机光伏电池的机理研究,15万元,2024.01-2026.12

  •  南方科技大学-深圳市亿优威光科技有限公司横向项目:激光打靶产生碎屑高时空分辨率检测,49万元,2025.03-2026.03

  • 南方科技大学力航系-劲鑫科技联合实验室(共同负责人),500万元(本人承担150万元)2022/05-2026/05

  • 博士后来深科研资助,30万元,2019.04-2022.04

  • 江苏省政府留学奖学金,6万元,2017.08-2018.02

  • 新加坡材料工程研究院核心项目:Investigation of electrospray coated interfacial layers for high performance polymer solar cells,4万元,2012.06-2013.01

  • 南京邮电大学科研项目:新型光纤智能化测量的研究,0.6万元,2006.04-2008.12

参与(作为核心成员)

  • 深圳市基础研究专项(自然科学基金)基础研究重点项目:光刻机极紫外光源及工件台超精密检测控制等方法研究项目,200万元(本人承担70万元),2025.03.07-2028.03.06

  • 国家自然科学基金重大科研仪器研制项目:基于微米级锡液滴的高亮度桌面极紫外光源研制,613.5万元(本人承担100万元),2024.01-2028.12

  • 国家自然科学基金重点项目:柔性电子喷印制造中非牛顿流体液滴生成和冲击动力学研究,300万元(本人承担30万元),2020.01-2024.12

  • 国家重大专项:辐射烧蚀与内爆压缩基础问题研究-ICF内爆流体不稳定的比拟研究,50万元(本人承担25万元),2018.01-2020.06

  • 国家自然科学基金面上项目:基于C^N=N双齿配体的金属铱、铂配合物的新型光电活性材料及器件研究, 38万元,2011.01-201.13

  • 国家自然科学基金面上项目:基于p-n共嵌聚合物/有机物的太阳能电池研究:材料、器件与模拟,37万元,2010.01-2012.12


代表论文(*通信作者;IF: impact factor)

1. B. Jiang, B. Yu, Y. Zhang, W. Deng, B. Xu*, X. Zhao*, Blade printing of low-melting-point alloys as back electrodes for high-efficiency and stable inverted perovskite solar cells, Energy & Environmental Science, 2025. (IF: 32.4, JCR Q1)

2. Q. Chen, T. Zhai, C. Xu, B. Liu, H. Xia, W. Deng, X. Zhao*, Y. Liu*, Axisymmetric explosions in a liquid microjet induced by co-axial nanosecond laser, International Journal of Multiphase Flow, 188, 105182, 2025. (IF: 3.6, JCR Q2)

3. C. Xu, Z. Zhang, T. Zhai, X. Zhao, L. Gao*, Y. Liu*, W. Deng*, Response of a millimeter-sized opaque drop to tightly focused nanosecond laser pulse, Science China Physics, Mechanics & Astronomy, 2025. (IF: 6.4, JCR Q1)

4. B. Yu, L. Kang, J. Liu, H. Xia, W. Deng*, X. Zhao*, Impact deposition of a single droplet of low-melting-point alloy as the top electrode for organic photovoltaics, Small Methods, 2401235, 2024. (IF: 10.7, JCR Q1)

5. B. Liu, J. Wang, G. Zhang, G. Du, H. Xia, W. Deng*, X. Zhao*, Using a flexible fountain pen to directly write organic semiconductor patterns with crystallization regulated by the precursor film, Small Methods, 2400098, 2024. (IF: 10.7, JCR Q1)

6. J. Chang, G. Zhang, C. Zhang, C. Xu, H. Xia, W. Deng*, X. Zhao*, Characterizing the thickness distribution of donor and acceptor in organic photovoltaics via quasi-monochromatic light transmittance, Advanced Optical Materials, 2302693, 2024. (IF: 8.0, JCR Q1)

7. 邓巍巍,翟天琪,高立豪,许晟昊,赵新彦,刘艳初*,面向EUV光源的实验流体力学研究进展,力学进展,54(1),2024.

8. L. Liu, B. Yu, L. Kang, W. Deng*, X. Zhao*, Blade coating of alloy as top electrodes for efficient all-printed organic photovoltaics, Advanced Functional Materials, 2214781, 2023. (IF: 18.5, JCR Q1)

9. D. Wu, G. Du, H. Liu, W. Chen, X. Li, Z. Wang, H. Tang, B. Liu, C. Liu, Y. Chen, Z. Song, W. Deng, H. Yuan,* K. Wang,* X. Zhao*, Flexible microcomb printed PbS quantum dot film enables scalable fabrication of near infrared photodetector, Advanced Optical Materials, 2300945, 2023. (IF: 8.0, JCR Q1)

10. K. Chang, B. Yu, L. Liu, D. Fang, X. Zhao*, B. Mi*, W. Huang*, W. Deng*, Efficient fully-sprayed organic solar cells with coffee-ring-free photoactive layer and alloy top-electrode, Advanced Materials Technologies, 2201921, 2023.(IF: 6.4, JCR Q1)

11. Y. Li, K. Chang, J. Chang, B. Yu, B. Liu, X. Zhao*, W. Deng*, Printed kirigami organic photovoltaics for efficient solar tracking, Advanced Functional Materials, 2204004, 2022.(IF: 18.5, JCR Q1)

12. B. Yu, L. Liu, B. Liu, X. Zhao*, W Deng*, Printing of low-melting-point alloy as top electrode for organic solar cells, Advanced Optical Materials, 2201977, 2022.(IF: 8.0, JCR Q1)

13. G. Du, Z. Wang, T. Zhai, Y. Li, K. Chang, B. Yu, X. Zhao*, W. Deng*, Flow-enhanced Flexible Micro-Comb Printing of Organic Solar Cells, ACS Applied Materials & Interfaces, 14, 13572−13583, 2022.(IF: 8.5, JCR Q1)

14. Y. Pan, Z. Wang, X. Zhao, W. Deng*, H. Xia*, On axisymmetric dynamic spin coating with a single drop of ethanol, Journal of Fluid Mechanics, 951, A30, 2022. (IF: 3.6, JCR Q1)

15. H. Liu, Z. Wang, L. Gao, Y. Huang, H. Tang, X. Zhao*, Weiwei Deng*, Optofluidic resonance of a transparent liquid jet excited by a continuous wave laser, Physical Review Letters, 127, 244502, 2021.(IF: 8.1, JCR Q1)

16. P. Yang, T. Zhai, B. Yu, G. Du, B. Mi*, X. Zhao*, W. Deng*, Toward all aerosol printing of high-efficiency organic solar cells using environmentally friendly solvents in ambient air, Journal of Materials Chemistry A, 9, 17198,2021.(IF: 10.8, JCR Q1) 

17. K. Chang, Y. Li, H. Xia, J. Chang, B. Yu, G. Du, P. Yang, X. Zhao*, B. Mi*, W. Huang*, W. Deng*, Organic photovoltaic printed via sheet electrospray enabled by quadrupole electrodes, ACS Applied Materials & Interfaces, 13, 56375-56384, 2021.(IF: 8.5, JCR Q1)

18. H. Xia, B. Yu, K. Chang, X. Zhao*, W Deng*, Shaping electrospray deposition profile by a quadrupole: from circular to elliptical patterns, Journal of Aerosol Science, 154, 105739, 2021.(IF: 3.9, JCR Q1)

19. Y. Li, L. Deng, G. Du, Y. Li, X. Zhao*, W. Deng*, Additive-free organic solar cells with enhanced efficiency enabled by unidirectional printing flow of high shear rate, Organic Electronics, 97, 106274, 2021.(IF: 2.7, JCR Q2)

20. X. Zhao, W. Deng*, Printing photovoltaics by electrospray, Opto-Electronic Advances, 3: 190038, 2020. (IF: 15.3, JCR Q1)

21. M. Zhong, Y. Li, G. Du, Y. Li, K. Chang, T.-K. Lau, X. Lu, H. Sun, X. Guo, Y.-F. Guo, X. Zhao*, W. Deng*, Soft porous blade printing of nonfullerene organic solar cells, ACS Applied Materials & Interfaces, 12: 25843-25852, 2020.(IF: 8.5, JCR Q1)

22. K. Chang, Y. Li, G. Du, M. Zhong, P. Yang, Y. Zhu, F. He, B. Mi*, X. Zhao*, W. Deng*, Efficient Non-fullerene organic photovoltaics printed by electrospray via solvent engineering, ACS Applied Materials & Interfaces, 12: 27405-27415, 2020.(IF: 8.5, JCR Q1)

23. S. Wang, P. Yang, K. Chang, W. Lv, B Mi*, J. Song*, X. Zhao*, Z. Gao*, A new dibenzo[g.p] Chrysene derivative as an efficient anode buffer for inverted polymer solar cells, Organic Electronics, 74: 269-275, 2019.(IF: 2.7, JCR Q2)

24. X. Zhao, Z. Tao, W. Yang, K. Xu, L. Wang, Y. Jiang, Q. Zhang, Z. Gao, B. Mi*, M. Hong*, W. Deng*, Morphology and electrical characteristics of polymer: Fullerene films deposited by electrospray, Solar Energy Material & Solar Cells, 183: 137-145, 2018. (IF: 6.3, JCR Q1)

25. X. Zhao, G. Wang, M. Hong*, Hybrid structures of Fe3O4 and Ag nanoparticles on Si nanopillar arrays substrate for SERS applications, Materials Chemistry and Physics, 214: 377-382, 2018.(IF: 4.3, JCR Q2)

26. X. Zhao, D. E. Johnston*, J. C. Rodriguez, Z. Tao, B. Mi*, W. Deng*, Nanostructured Semiconducting Polymer Films with Enhanced Reorientation of Crystalline Domains by Electrospray Deposition, Macromolecular Materials and Engineering, 302: 1700090, 2017. (IF: 4.2, JCR Q2)

27. X. Zhao*, T. Wang, L. Wang, X. Zhang, Z. Tao, B. Mi*, Z. Gao*, Improved efficiency and stability in polymer solar cells using a tetra-nuclear Zinc(II) complex interfacial layer, Organic Electronics, 50: 273-278, 2017. (IF: 2.7, JCR Q2)

28. X. Zhao, C. Li, W. Yang, W Deng*, Paper-based Electrospray Emitters, Journal of Aerosol Science, 113: 108-113, 2017. (IF: 3.9, JCR Q1)

29. X. Zhao, W. Yang, C. Li, X. Wang, S. L. Lim, D. Qi, R. Wang, Z. Gao, B. Mi*, Z.-K. Chen*, W. Huang*, W. Deng*, Effects of Damkhöler number of evaporation on the morphology of active layer and the performance of organic heterojunction solar cells fabricated by electrospray method, Solar Energy Material & Solar Cells, 134: 140-147, 2015. (IF: 6.3, JCR Q1)

30. X. Zhao, X. Wang, S. L. Lim, D. Qi, R. Wang, Z. Gao, B. Mi*, Z.-K. Chen*, W. Huang*, W. Deng*, Enhancement of the performance of organic solar cells by electrospray deposition with optimal solvent system, Solar Energy Material & Solar Cells, 121: 119-125, 2014. (IF: 6.3, JCR Q1)

31. X. Zhao, Z. Li, T. Zhu, B. Mi*, Z. Gao*, W. Huang*, Structure optimization of organic planar heterojunction solar cells, Journal of Physics D: Applied Physics, 46: 195105, 2013.(IF: 3.1, JCR Q2)

32. X. Zhao, B. Lojewski. W.Yang, T. Zhu, B. Mi, Z. Gao, W. Huang*, W. Deng*. Electrospray as a fabrication tool in organic photovoltaics, Reviews in Nanoscience and Nanotechnology, 1: 172-186, 2012.

33. X. Zhao, B. Mi, Z. Gao*, W. Huang*, Recent progress in the numerical modeling for organic thin film solar cells, Science China: Physics, Mechanics & Astronomy, 54: 375-387, 2011.(IF: 6.4, JCR Q1)


出版教材

陈鹤鸣,赵新彦,汪静丽,《激光原理及应用》,电子工业出版社,2022年第四版,2017年第三版,2013年第二版,2009年第一版。共13章64万字,本人撰写共10章50万字。教材获奖:十一五”普通高等教育本科国家级规划教材;“十二五”普通高等教育本科国家级规划教材;“十三五”江苏省高等学校重点教材;电子信息科学与工程类专业精品教材;江苏省精品教材。


发明专利

1. 邓巍巍,赵新彦,夏辉辉,刘艳初,刘炳杨,翟天琪,于博洋,高立豪,许晟昊,用于极紫外光刻机的反射镜及极紫外光线收集方法. ZL 2022 1 0925661.X, 已授权。授权公告日:2024.10.18

2. 翟天琪,赵新彦,于博洋,杨平,邓巍巍,一种气溶胶打印装置及打印方法. CN202110639627.1, 已授权。授权公告日:2022.09.20

3. 常凯,于博洋,赵新彦,邓巍巍,一种四电极喷雾打印装置及薄膜制备方法. ZL 2021 1 0866502.2, 已授权。授权公告日:2022.10.04

4. 赵新彦,杜更新,邓巍巍,一种刮涂组件及刮涂设备. ZL 2021 1 1482064.6, 已授权。授权公告日:2023.03.21

5. 李永哲,邓玲玲,赵新彦,邓巍巍,一种有机光伏器件活性层的制备方法及其应用。ZL 2021 1 0535216.8,已授权。授权公告日:2022.10.18

6. 邓巍巍,赵新彦,李亚星,一种光伏剪纸结构及其制造方法. 申请号:202210536479.5。申请日:2022.05.17

7. 邓巍巍,赵新彦,于博洋,刘霖娜,一种低熔点合金顶电极及其制备方法与应用. 申请号:202211392831.9。申请日:2022.11.08

8. 邓巍巍,赵新彦,刘霖娜,于博洋,一种图案化低熔点合金电极的制备方法及刮涂组件. 申请号:2023101903071。申请日:2023.02.22

9. 于博洋,邓巍巍,赵新彦,一种超薄金属打印装置. 申请号:2023114911199。申请日:2023.11.09

10. 于博洋,康梁钰淇,刘简宁,赵新彦,邓巍巍,一种超薄金属滴落装置. 申请号:2023114938844。申请日:2023.11.09


产学研成果

1. 基于专利技术研发实验设备:微流体光电薄膜制备平台

用户单位包括:南方科技大学、北京大学深圳研究生院、苏州大学、深圳大学、深圳技术大学、常州大学等。

2. 代表“EUV光源项目”团队参加2023年南山创业之星大赛,获得全行业赛道冠军。

3. 代表“EUV光源项目”团队参加2023年深圳市创新创业大赛,获得高端装备赛道冠军。


教学课程

南方科技大学:《光刻力学》课程1/4内容

南京邮电大学:《激光原理》《信息光学》《物理光学》《矩阵光学》《光电成像原理》

南京工业大学:《光子学导论》《薄膜过程与器件物理》


教学获奖

  • 南京邮电大学教育教学成果奖,一等奖,2013年;

  • 南京邮电大学“三维通信”奖教金,二等奖,2011年;

  • “光电子系列课程”江苏省高校优秀教学团队,一等奖,2010年;

  • 江苏省物理及实验科技作品创新竞赛优秀指导教师,二等奖, 2008年;

  • 南京邮电大学青年教师优秀教学奖; 2008年;

  • 南京邮电大学第七届青年教师授课竞赛,二等奖,2007年。